Respiratory Protection Awareness

Time limit: 0

Questionnaire Summary

0 of 15 Questions completed

Questions:

Information

You have already completed the questionnaire before. Hence you can not start it again.

Questionnaire is loading…

You must sign in or sign up to start the questionnaire.

You must first complete the following:

Results

Questionnaire complete. Results are being recorded.

Results

0 of 15 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

Review

Answered

Correct

Incorrect

Question 1 of 15

1. Question

1. What 3 requirements for workers must be completed prior to the worker being allowed to wear a respirator?

A. Worker received physical exam with vaccinations, training on respiratory protection and respirator fit testing.
Correct Incorrect Correct answer

B. Worker is to be medically approved by a licensed healthcare professional and as needed receive additional xrays or pulmonary function tests, receiving respiratory protection training, and pass his fit testing with a NIOSH approved respirator.
Correct Incorrect Correct answer

C. Worker is to receive a medical screening approval by a physician, training on how to use a respiratory and pass his fit test on a dust mask.
Correct Incorrect Correct answer

D. Worker is to be medically screened and approved and when required receive additional xrays and pulmonary function tests, trained on how to property put on a respirator and be qualitatively fit tested with a full face respirator.
Correct Incorrect Correct answer

Correct

Incorrect

Question 2 of 15

2. Question

2. Respiratory Protection Training does not include:

A. Selection of chemical or toxic particle filters and cartridges
Correct Incorrect Correct answer

B. Training on how to don and doff a respirator, clean and store, and how to wear and select the most appropriate filters and respirators.
Correct Incorrect Correct answer

C. Differences in respirator types and protection factors
Correct Incorrect Correct answer

D. Respiratory protection program elements
Correct Incorrect Correct answer

E. How to use a dust mask instead of a NIOSH approved respirator
Correct Incorrect Correct answer

Correct

Incorrect

Question 3 of 15

3. Question

OSHA requires employers to pay for respirators and cartridges and ensure that the workers properly use these respirators that are best suited to protect the worker from the toxic particles and hazardous substances.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 4 of 15

4. Question

4. A written respiratory protection program is required by every business that has employees wear respirators.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 5 of 15

5. Question

5. A NIOSH approved half face respirator and a N95 filtering facepiece respirator have the identical approved protection factor, APR of 10.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 6 of 15

6. Question

6. Painters that are exposed to drywall dust, solvents and metal particulate additives in pigment should at a minimum wear:

A. A dust mask
Correct Incorrect Correct answer

B. Full face respirator approved by NIOSH and an ammonia vapor cartridges
Correct Incorrect Correct answer

C. Half face respirator approved by NIOSH and P100 filters
Correct Incorrect Correct answer

D. Half face respirator approved by NIOSH and organic vapor/P100 cartridges.
Correct Incorrect Correct answer

E. Filtering facepiece respirator, N95 approved by NIOSH
Correct Incorrect Correct answer

Correct

Incorrect

Question 7 of 15

7. Question

7. OSHA and MSHA require workers to thoroughly wash, rinse and dry their half and full face respirators by:

A. Cleaning the respirator and cartridges with an alcoholic wipe
Correct Incorrect Correct answer

B. Remove the filters/cartridges, the seals and components and separate the head gear and then wash the components (not the cartridges/filters) in warm soapy water, rinse in clean potable water and if needed disinfect with a low concentration of bleach in water prior to drying. Respirator and cartridges/filters are to be stored separately in a clean ziplock or other bag.
Correct Incorrect Correct answer

C. Dropping the filters and respirator into a cold soapy water bath, rinsing with potable water and then drying all components. Once dry, the respirator and cartridges/filters should be reassembled and placed in a ziplock bag.
Correct Incorrect Correct answer

D. Wash, rinse, and dry the respirator assembly and then place the cleaned filters/cartridges and respirator in separate zip lock storage bags.
Correct Incorrect Correct answer

Correct

Incorrect

Question 8 of 15

8. Question

8. Only NIOSH approved respirators and their filtration media or cartridges that are designed to filter out hazardous substances and be chemically compatible for toxic chemical or hazardous environment should be used by workers.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 9 of 15

9. Question

9. Respirators are designed to protect workers when they fit snugly and form a tight seal. Workers are allowed to have mustaches and beards while they wear a respirator as some protection is better than none.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 10 of 15

10. Question

10. A medical screening questionnaire is the first step to being medically approved by a licensed healthcare professional to wear a respirator. A licensed healthcare professional and the standards may require additional medical testing or an in person exam depending upon the exposures to hazardous chemicals and toxic particles. What is not required for the medical exam for workers that will wear a respirator?

A. Blood tests and mammogram
Correct Incorrect Correct answer

B. Worker may be required to obtain a chest Xray and/or a pulmonary function test.
Correct Incorrect Correct answer

C. Colonoscopy
Correct Incorrect Correct answer

D. A and C
Correct Incorrect Correct answer

Correct

Incorrect

Question 11 of 15

11. Question

11. Exposure to asbestos during abatement or construction activities requires each worker to wear just a NIOSH approved N95 respirator.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 12 of 15

12. Question

12. Respirators come in multiple styles, sizes (XS, S, Med, Large, Low Profile) and materials. Employers are required to supply at no cost to the worker a variety of respirators to best fit the unique facial features and head size of their workers.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 13 of 15

13. Question

13. A NIOSH approved respirator is designed to capture and block toxic particles down to 0.3 microns in particle size. Viruses that are smaller, at 0.1 micron will never be trapped and workers are still exposed to these particles.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 14 of 15

14. Question

14. The employer switched manufacturers for their respirators from Honeywell to 3M. You need new P100 pancake filters for your Honeywell half face respirator. You can attach, use and be protected by the 3M P100 filters if you can just glue them on.

A. True
Correct Incorrect Correct answer

B. False
Correct Incorrect Correct answer

Correct

Incorrect

Question 15 of 15

15. Question

15. Your work area has solvent vapors and toxic air with the potential for low oxygen levels. At the minimum, to be safe and protected you should select which of the following respiratory protection methods?

A. A NIOSH N95 filtering facepiece respirator
Correct Incorrect Correct answer

B. A NIOSH approved full face respirator with Grade D supplied air or SCBA.
Correct Incorrect Correct answer

C. A half face respirator with P100 filters
Correct Incorrect Correct answer

D. A full face respirator with organic vapor and P100 cartridges
Correct Incorrect Correct answer

Correct

Incorrect

Proceed to Respirator Fit Test